FilterKleer swimming pool filter cleaner. 1 gal. (US)

FILTERKLEER

Ideally, all filter medias need to be cleaned and de-greased every 12 months.

In recent times the Australian Skin Council has embarked on an education plan to help ward off skin cancers by using all forms of suntan lotions and block out. Although it’s very important to stop sunburn, it has caused problems with pool filtration, but they can easily be overcome by “de-greasing” the filter media.

All filter medias are effected. Cartridge filters, sand media, glass media - even Zelbrite filter media. This can be done simply by using FILTERKLEER. From experience this needs to be done every 12 months to clean all the oil and grease out of the media and is best done during the warmer months when the water temp is over 24 degrees. This will help release the build up which will cause the backwashing to become more frequent.

Frequent backwashing uses more water, and more chemicals which increases the cost of running a pool.

USING

Caution: Wear gloves and protective clothing. Keep out of reach of children.

Sand-type filters (sand, Zelbrite, glass media)

1. Dilute 1 litre with 10 litres of water in a bucket
2. Stop the pumping cycle
3. Drain the filter overnight and replace the drain plug.
4. Remove the Multi Port Valve (top mount filters)  or the lid (side mount filters)
5. Pour the mixture into the filter.
6. Replace the MPV or filter lid.
7. Leave for 12 hours.
8. Backwash to WASTE and rinse.

Cartridge filters

1. Remove the cartridge
2. Soak the cartridge for 6 hours or overnight  in a mixture of FILTERKLEER and warm water diluted 1:10
3. Clean the filter inside and out with the garden hose.
3. Replace the filter.