Salz für Schwimmbäder (6 Säcke) Speziell für den Einsatz in Schwimmbädern verfeinert.
Mindestbestellmenge 6 x 25 kg Säcke
NUR FESTLAND. Keine Zustellung auf Inseln.
Lieferzeit: ca. 3 - 8 Werktage.
* Schwere Güter bzw übergroße Verpackungen – längere Lieferzeit
• Specially prepared by TRS for swimming pools and spas.
• High quality naturally mined salt in its purest form, clean, white, very low levels of insoluble solids. No additives.
• Fine salt crystals, easy to pour, fast dissolving.
How much salt does a pool need? Normally between 3kg and 5kg (depending on brannd and model) of salt for every 1,000 litres (m3) (220 gallons) of swimming pool volume is required to reach 3,000 to 4,000 ppm. So you would need about 9 x 25 Kg bags to start a typical 10 x 4 pool. Different chlorinators require slightly different levels of salinity so do follow the manufacturers' recommendation for best results.
Filter media: For best results when using a saltwater chlorinator, you may wish to change the sand in your filter for Zelbrite filter media.
Specification
| PARAMETERS/UNITS | SALES GUARANTEES | ANALYSIS METHOD |
|---|---|---|
| Sodium chloride(NaCl: %) | 97.5 ( Dry basis ) | By difference |
| Moisture (%) | 2.5 | Oven Dry |
| Insoluble matter(%) | 0.05 | Gravimetric |
| Calcium (Ca; ppm) | 15.00 | Titration |
| Magnesium (Mg;ppm) | 1.00 | Titration |
| Iron (Fe;ppm) | 5.00 | Spectrophotometry |
| Sulphate (So4; %) | 0.025 | Titration |
| Potassium ferrocyanide(ppm) | 10.00max | Spectrophotometry |
