Fliesenkleber Weberˇ

Hochleistungs-vorgemischter Fliesenkleber zum Mischen mit Wasser. Bietet eine hervorragende Klebkraft zum Verlegen von Poolfliesen.

Loading...

Coverage

3 - 7 kg per m2, depending on use - one bag covers approximately 4 square metres.

• Ideal for tiling in swimming pools (public or private).
• High performance adhesive for fixing low-porous and non-porous tiles. Ideal tiling in swimming pools (manufacturer's recommendation).
• Special bonding agent provides a very good bond on low and non-porous tiles e.g. porcelain tiles, granites, and natural stones.
• Ideal for fixing large sized tiles.
• Applicable on cement-based substrate, or on existing tiles.

Using

It is important to do this correctly -  traditional Thai method of tiling must NOT be used.

For more precise instructions in both English and Thai, please see this Weber page before attempting swimming pool tiling  for the first time. Ensure that any sub contractors or privatly hired labour is aware of these instructions. Failure to do so can incur expensive retiling in as little as two years.

• The substrate should be flat, hard level, clean, and dry with normal absorption.
• Tiles should not be immersed in water. Tiles must be clean and dry.
• Mix evenly with water 1:3 by volume or 1:4 by weight.
• Use a mechanical mixer or power tool attachment.
• Spread on substrate with a toothed trowel. Apply also to the back of the tiles

• Recommended thickness: 2 to 10 mm.
• Adjustment time 15 minutes.
• Pot life: 20 minutes - keep away from sunlight.
Shelf life: 12 months.