Chemical dosing systems

shipping

Emaux pH chemical dosing system CTRL7‐PH

Emaux automatic pH monitoring and dosing system. CTRL7‐PH, up to 7 litres/hr

Solenoid driven pump (no squeeze tubes).

Guarantee 1 year (probe 6 months).


Delivery: approx. 3 - 6 business days
Livraison: env. 3 - 6 jours ouvrables
Lieferzeit: ca. 3 - 6 Werktage
Leverans: ca. 3 - 6 arbetsdagar
การจัดส่ง: ประมาณ. 3 - 6 วันทำการ

More details

620202

฿ 20,467.29

The installation and configuration instructions are only available in English. Except within a 100 km radius of our location, we cannot help you install this product.

Complete kit

  • Pump: CTRL7-PH Flow rate up to 7L/hr.
  • pH probe
  • Buffer solutions (3) for pH probe calibration
  • Pipes and pipe fitting kit

Guarantee: Pump: 1 years. Probe: 6 months

Compact, easy to install and operate. Digital electromagnetic membrane pump. Easy operation without lubrication, is almost maintenance free. Adjustble manual control with proportional dosing flow rate, for accurate PH management.

The automatic monitoring system measures the PH value of water through the relative voltage of probes. Total control & dosing through the desired setpoint.

*Unlike traditional peristaltic pumps, the dosing pumps is activated by a PTFE membrane mounted on a piston and electromagnet. When the piston on the electromagnet is attracted, a pressure is produced in the pump body with an expulsion of liquid from discharge valve. Once the electric impulse is finished a spring bring the piston back to the initial position, with a recall of liquid through the suction valve. LED indicators control panel to monitor the dosing pump, with electronic microcontrol technology. Easy operation without lubrication requested, is almost maintenance free. No squeeze tubes to replace!

With a compact structure, nice design,professional recognition, easy to install and operate. Digital Metering pump with pH/Redox control meter on board. Adjustbale manual control with proportional dosing flow rate, for the right PH & Redox management.

Main Features:

  • Significant number of metering pumps, 16-word dual-line LCD screen, full working status display, automatic recording and storage
  • Built-in PH  monitor, or dosing only
  • Automatically pump flow control is determined in accordance with Monitor PH/ORP value
  • PH, flow and other automatic/ manual calibration
  • With level gauge input interface, low level alarm
  • Flow meter input, telematics control
  • Password protection

ATTENTION

Always dilute the acid by around 10 - 20% before using in pH pumps.

ATTENTION

Diluer toujours l'acide d'environ 10 - 20% avant de l'utiliser dans des pompes à pH.

VORSICHT

Verdünnen Sie die Säure immer um etwa 10 - 20%, bevor Sie sie in pH-Pumpen verwenden.

ความสนใจ

เจือจางกรดเสมอประมาณ 10 - 20% ก่อนใช้ในปั๊ม pH

UPPMÄRKSAMHET

Späd alltid syran med cirka 10 - 20% innan den används i pH -pumpar.