CheliKleer stain & scale remover. 1 gal. (US)

CheliKleer stain and scale preventer and remover

Non foaming. It removes lighter existing metal stains and sequesters metals in the water to prevent new stains from forming.
Raw well water in many areas has high mineral content such as iron and manganese in the water.When chlorine is added, it causes rust and scale, which are difficult to remove and make the water clear. Cost-effective and easy removal of lighter stains. Protects pumps, filters, and pool heat exchanges and elements. Once applied, you can swim after running the filtration system of one turnover. 

Metal stains and scale are quickly removed or from pool walls while equipment is protected with professional strength chelating agents. Swimming can resume immediately after treatment.

Prevents scale build-up on filters, pumps and piping. No testing is required and no waiting swim immediately.

Follow treatment with weekly doses to prevent metals and minerals from staining pool surfaces.

• Prevents staining and scaling of pool surfaces and components by chelating minerals such as iron, calcium, and managanese.
• Cost effective and easy removal of fresh stains
• Protects pumps, filters, and pool heater exchange elements.

NOTE: Heavy stains that have been allowed to build up may be difficult to remove with chemicals and may need to be removed manually taking care not to damage the pool wall surface.

For a permanent solution, consider installing a well water filter filled with Manganese Green Sand.

USE

Mix with water in  a PLASTIC bucket or PLASTIC watering can and apply around the water perimeter.

Initial treatment:

330 cc (0.333 litre) per 10 m3 (10,000 litre) of pool volume including balance tank (if any).

Maintenance treatment:

100 cc (0.1 litre) per 10 m3 (10,000 litre) of pool volume including  balance tank (if any).

Prevents staining and scaling of pool service in the water and helps the water become clear faster. 


Use: New pool fill: apply 225 mL per 19 m³ of pool water and run filtration system 24 to 48 hours, before adding chlorine and then adjusting the chlorine level and balancing the pH.