Dolphin M550 robot

Engineered to tackle the most stubborn debris, the Maytronics Dolphin M550 robotic pool cleaner redefines the ease of pool maintenance. Its simple operation and user-friendly handling eliminate the complexities of pool cleaning. This new cleaner features advanced technologies and the best pool cleaning performance.

Thanks to the MyDolphinTM Plus app, the M550 remains constantly connected, empowering you to control your cleaner effortlessly from anywhere at any time.

World's first Climate Care Certified pool cleaner

Reduce energy consumption by up 83%
• Reduce water wastage 60–80% from less backwashes
• Use less chemicals from less backwashing
• Ideal pool length: Up to 15m
• Cleaning coverage: Floor, walls and waterline
• Cleaning cycle time: Default mode: 2 hours / Fast mode: 1 hour (floor only)
Power supply features: Cycle selector, weekly timer, pick-me-up mode, remote drive
App connectivity for control and programming: Always Connected MyDolphin™ Plus app - full-featured programming
Navigation and manoeuvrability: CleverClean scanning with gyro navigation and dynamic-dual drive motor
All-terrain PVC brushes with dual active scrubbing
Filtration: Extra sealing, single-level filtration system with ultra-fine filter and interchangeable fine filters.
Caddy: Included
Cable + swivel: 18m with swivel
Robot weight: 11kg

Warranty: 3 years


• Brushes, scrubs, vacuums, and filters the entire pool including the floor, walls, and waterline. The new, advanced technology enables optimal scanning and pool coverage in a shorter cycle time.
• The brushing system is twice as efficient. The rigorous brushing and scrubbing action reinforces the elimination of algae and bacteria.
• Top-opening filtration compartments enabling easy and convenient maintenance of the filtration system
• One-way water valves prevent the escape of debris and ensure rapid water drainage
• Adjustable floats allow efficient scanning in different pool sizes
• Low voltage motor provides minimal energy consumption
• DIY – easy maintenance, at user and local dealer level

THREE year warranty 

USING
The robot will not climb the wall if there is algae in the pool. The algae surface is too slippery and the robot will not get traction. The only things that will remove algae are chemicals, not the robot. Also, the robot may not climb the wall if the PH reading is not balanced.
The robot isn’t meant to remove stains and dirt between tiles. These build up over time due to poor maintenance.  The robot is meant to prevent stains and dirt from building up. The robot should be introduced into a clean pool and it will maintain that high level of cleanliness as the dirt is removed very regularly.
We recommend hand scrubbing the dirt out of the tiles as the robot with a foam brush or a combined brush will not remove the build up of dirt. The scrubbing capability isn’t strong enough  to remove stubborn stains in the grout.